MidSouth Crawl Space Solutions Before & After Photos

This crawlspace was set right above our 12" benchmark to install an encapsulation. Anything under 12" is too low for our guys and products to get under. 

This house originally had lattice work wrapped around the perimeter of the crawlspace, leaving it susceptible to outside air. Thankfully, the homeowner had this bricked in, in anticipation of the encapsulation. Once this was done, our guys came out and installed our encapsulation system utilizing the sump pump, dehumidifier, drainage matting, and 20 mil liner. Now this crawlspace will be able to dry out without the influence of humidity and ground water seepage.

Some unsightly wall cracks our talented crews were able to seal up during the process of stabilizing this home in Morgan City, LA!

This once wet and humid crawl space has been transformed by both our encapsulation and smartjack systems. The CleanSpace Liner you see throughout the whole underside of the home is helping tackle the moisture problem. It is much more durable than your average vapor barrier, and is tightly secured to the walls and floors of the space. Also seen in the photo is one of our smart jacks. These act as a permanent support system for the joists/floors that were already affected by the moisture. They can even be adjusted to fit the home's needs as it shift throughout the years. Unseen in the photo is our crawl space dehumidifier and sump pump system, which both also work towards keeping the space dry and healthy. Great job to our design specialists and crew members who planned and installed this job!

Here is a before and after of a crawl space we encapsulated in Basile, LA, featuring one of our dedicated crew members! The crawl space was low and tight, but we were still able to do what we needed to do to make sure this home stays protected against all forms of moisture. In the after image, you'll see our durable CleanSpace Liner that has been laid across the entire crawl space and its supports, acting as a shield against the ground water that came from the once fully exposed soil. We're very proud of their consistent work even in tough conditions!

This home in New Iberia had a crawlspace and a basement. They were having leaks in the basement and moisture and mold in the crawlspace. Henry Bennett performed the inspection and presented our solution. We were able to fix both! Our basement waterproofing system is an inside, in-ground solution. We place a drainage pipe around the perimeter of the room to catch the leaks that come in from the walls and up from the footing. We also install wall products to not only direct the moisture to the drain, but they brighten up the whole room! The perimeter drainage line drains to the sump pump thats also installed in the ground. When the water reaches a certain level in the pump, it automatically sends it out and away from the home.  This permanently protects the home from water intrusion and provides peace of mind to the homeowners!