Mold Problems Before & After Photos

This homeowner called us as they were having moisture issues in their home. We came out to the home and addressed their concerns. We sprayed MoldX2 to remove the mold and installed the CleanSpace Crawlspace Encapsulation System.

This system will create an environment that can be controlled to make sure that mold will not grow and keep moisture levels to a minimum. This homeowner is now happy that they no longer have to worry about moisture issues in their crawlspace and will have a healthier, happier home.

This home was experiencing an overabundance of moisture intrusion. This was in part due to the amount of excess falling insulation and plastic sheeting on the ground, holding moisture.

Our team cleaned out the crawlspace, getting it ready for a full encapsulation and mold spray. We remove the plastic sheeting as well, because if it is left, it will hold water in puddles leaving a lasting, musty scent underneath. Once it was up, we laid out our liner on the ground and sealed it up across the crawlspace walls as well. We added a sump pump to keep the water out of the crawlspace, and a dehumidifier to maintain the dry atmosphere. 

Our MOLD-X2 treatment is a powerful spray we use to help the crawlspace get rid of mold. It works in seconds, safely eliminating mold spores and stains. 

We always recommend encapsulation when mold is present so we can treat the underlying issues. Otherwise, mold treatment is just a bandaid that will eventually have to be redone. 

Located in Florence, MS, this crawlspace was holding moisture and had been for a while. It was starting to build up and create a terrible mildew smells throughout the house. It was also causing floors to cup and swell. Our crew was able to pull out all the falling, damp insulation, clean out the crawlspace, and install our encapsulation system. Our system will dry out the underside of the house, and keep moisture from coming back in. We installed a dehumidifier to regulate the air, and a sump pump in the ground to capture excess ground water and return it outside the home.

This homeowner in Raymond, MS gave us a call because her home was experiencing sagging floors. Melissa performed a very detailed inspection, finding moisture and significant mold issues.

Because the moisture was so bad, they were having heavy mold issues; to the point that they had several beams and joists rotting. They had the woodwork repaired before our guys came to install the encapsulation. Once this was taken care of, our team was able to treat the mold and protect the new and remaining joists from moisture issues in the future by installed a waterproofing system. Mike and his crew completed the job and got a great review.